Description – Application
The SLEEVE TAG is designed for demanding industrial applications involving severe mechanical, thermal and chemical stresses.
The SLEEVE TAG Nylon part (PA6) housing is produced using ultrasonic welding technique which not only warrants a good thermal inertial protection, but equally is a perfect protection against impact shock, pressure and other mechanical stresses.
The SLEEVE TAG with its good UV resistance nylon part is perfectly suitable also for outdoor applications such as offshore platforms items identification.
The SLEEVE TAG is available in Low Frequency, High Frequency and UHF.
The SLEEVE TAG is proposed in 5 different colors (Black, yellow, red, green, blue).
The SLEEVE TAG can be ordered with an additional EMI Foil which will allow using it in metal environment.
The SLEEVE TAG can be laser engraved or even proposed with a customized insert.
|Operating Freq.||125 KHz – 13.56 MHz – 860 MHz ~ 960 MHz|
ISO/IEC 7816, ISO/IEC 15693, NFC ForumTM Type 2,
ISO/IEC 18000-63, EPC Gen2 V2
|ESD||±5 KV, 2 times|
|Dimensions||27 x 20.5 mm|
Operating Frequency : -40 to +85°C / -40 to +185°F
Thermal Shock : -40 to +90°C, 5min soaking time, 30s transition, 100 cycles
Thermal Peak : +140°C 10h, +130°C 100h
Shock : IEC 68.2.29 – Sin-half-wave, 30g, 18ms, 1100 each direction, +X, -X, +Y, -Y, +Z, -Z
Vibration : IEC 68.2.6 – Sinusoidal, 6g, 10-200Hz, linear, 1Hz/s, 8h per axis, X,Y,Z
IP68 (1m, 24h)
Aqueous solution of salts, alcohol, hydrochloric acid (10%), fuel B, 25% ammonium chloride, humidity 90% r.H. (90°C, 100h)
|Certificates||RoHS & REACH conform. Conflict free sourcing www.conflictfreesourcing.org|