Description – Application

The QUUPPA-KF600 KEYFOB is fully and ready compatible with Quuppa protocol and eco-system. The Tag is designed to full fill all requirements for people flow management and secure access control use cases.

Thanks to its ultra-low power consumption, the keyfob guaranties un-surpassed battery lifetimes and on top of that its CR2016 battery can be replaced.

Its high precision accelerometer sensor permits to detect any movements, vibrations, shocks or a specific fall. The accelerometer parameters are configurable in order to adjust them to the final needs of the application.

All tag configuration parameters can be updated over-the-air through the back-channel commands.


The QUUPPA-KF600 KEYFOB can be proposed with :

  • NFC function to provide extra functionalities as registration, access control or micro-payments
  • Switch function
  • 2 LEDs green and red

The QUUPPA-KF600 KEYFOB can be laser engraved or silkscreen printed.


Quuppa Ready, full compatible

Accelerometer and optional Temperature sensors

Optional additional NFC Forum Tag Type 2 or 5

Two LEDs: Green and Red color



Quuppa Full Compatible

ISO/IEC15693 (NFC Forum Tag Type 5)

ISO/IEC14443 (NFC Forum Tag Type 2)

Battery Lifetime Up to 2 years depending on the Quuppa tag parameters
Reading Range

More than 75 meters for Quuppa

LOS of 200 meters

Up to 10 cm for the NFC interface

Sensors Accelerometer
Dimensions Length : 48 mm – Diameter : 38 mm – Thickness : 9 mm
Thermal Properties – 30 to + 60 °C / – 22 to + 140°F
Chemical Properties IP68 (1m, 24h)
Certificates RoHS & REACH conform. Conflict free sourcing www.conflictfreesourcing.org


Thank you for taking time to fill out this form :

(fields with * are mandatory)